Polymer80 PF9SS Jig Kit For PF9SS Frame Blanks

Designed specifically for use with PF9SS frame blanks, the Polymer80 PF9SS Jig Kit provides the precision tooling required to complete a single-subcompact 80% frame build. This kit is engineered to interface exclusively with the proprietary Polymer80 PF9SS frame geometry, ensuring correct pin hole alignment and rail seating during the finishing process. For the builder seeking a dedicated solution for the slimline platform, this jig kit represents the essential guiding component for the Polymer80 PF9SS frame blank.

Overview

The Polymer80 PF9SS Jig Kit for PF9SS frame blanks is a standalone drilling and routing fixture that replaces the need for multiple single-use templates. Manufactured from reinforced polymer, the jig body is CNC-machined to match the exact internal cavity dimensions of the PF9SS frame. It includes hardened steel drill bushings positioned at the specified trigger housing and pin locations. This kit is the only jig solution validated by Polymer80 for use with their PF9SS frame blanks, and it ships as a complete assembly with all necessary locating pins and instructions.

Features & Specs

• Exclusive compatibility: engineered solely for the Polymer80 PF9SS frame blank; does not fit PF940C, PF940V2, or standard compact frame geometries.
• Hardened steel drill bushings: pre-installed at the factory to maintain 0.001-inch positional tolerance for the trigger pin, locking block pin, and trigger housing pin holes.
• Integrated routing channels: milled guide paths for rear rail pocket removal and trigger housing shelf clearance, matched to the blank’s polymer web thickness.

Additional specifications include the jig body material of glass-reinforced nylon, overall dimensions of 7.0 x 1.5 x 2.0 inches, and an operating temperature range of -20°F to 140°F. The kit includes three locating dowel pins, one 3/32-inch hex wrench, and a printed assembly reference card. Weight is approximately 0.4 pounds. This is a complete jig kit; the PF9SS frame blank is sold separately.

Who It’s For

This jig kit is intended for experienced firearm builders who already possess a Polymer80 PF9SS frame blank and require the dedicated tooling to complete the finishing process. It is suited for individuals familiar with basic hand tool operation, including the use of a hand drill, drill press, or rotary tool with a routing base. The kit is not designed for use with frames from other manufacturers or for non-Polymer80 80% frame products. Builders who have previously completed a PF940C or PF940V2 build will find the PF9SS jig kit uses the same fundamental alignment and drilling principles but requires more precise material removal due to the reduced frame width of the slimline platform.

Shipping & FFL

The Polymer80 PF9SS Jig Kit for PF9SS frame blanks is a firearm component tool and does not contain a frame, receiver, or any controlled firearm part. This item ships free of additional handling fees to all US states and territories where such tools are legally permissible. Standard lead time is 2-5 business days via UPS Ground or USPS Priority Mail. No Federal Firearms License (FFL) transfer is required for this jig kit, as it is classified as a non-serialized tooling assembly. However, the end user must comply with all applicable federal, state, and local laws regarding the finishing of an 80% frame. It is the purchaser’s sole responsibility to verify legality of frame completion in their jurisdiction before purchasing this jig kit.